Support 23 S
1.77–3.1 m · 7.2 kg 5.8–10.2 ft · 15.9 lbs
They work great for us. Used them on our last 2 bridges to hold the upright columns. No need to tack weld turnbuckles.
Trusted by



Support MAG
Strong and stable brace with magnetic ends for steel structures. Available in lengths from 3’3″ – 22’10”. Perfect for aligning columns and frames before welding. Built for heavy-duty use – switch the magnets on and off with a single lever movement.
Model
Why crews love it:
🚚
On site in 25+ countries and in rental fleets.
🛡️
Use them on a job. If they are not right, send them back.
How a column gets plumbed and welded, the old way and with a magnet brace.
The old way 6 steps
The Stedox way 4 steps
0tack welds, cut-offs or grinding. The magnet goes on and comes off with one lever.
Details
| Length | 980–6,970 mm |
| Rough adjustment | 100 mm |
| Weight | 31 kg |
| Bracing angle | 30°–60° |
For engineers · Technical documents
Stedox® Support MAG is a wall brace used to erect and install prefabricated elements, panels and columns. It was developed from the ground up to be safe, durable and easy to handle.
Set it to length, attach it to the wall and floor, then rotate the brace to fine-adjust it to plumb. Rust protection: Strip galvanized tubes, powder coated, for a long life in wet and harsh conditions.
What’s included
How it works
Three steps, one person. Read the full operating instructions before first use.
Pull the telescopic tube out to roughly the length you need. It adjusts in 3.94″ steps.
Fasten both end brackets securely, at an angle of 30°–60° and above the centre of gravity of the wall.
Rotate the brace by the handle until the wall is plumb. The built-in stop keeps the threads from unscrewing.
We built these braces after years on site, and we answer for them ourselves. If something is not right, you talk to us directly.
wall braces sold
Every one shaped by feedback from rental companies, installers and carpenters.
Just as easy as I imagined.
Jonny
We couldn’t be happier with the quality of Stedox tools. The boys at Wallstreet Carpentry are hard on our tools and rely on them to last.
Devin D., Wallstreet Carpentry
We recommend · Aluminium
Support 23 S
1.8–3.1 m · 7.2 kg
Low wind loads and a floor bracket close to the wall: the light steel brace does the job.
Brace length needed: about 2.6 m
Permissible load at this length: about 5.7 kN along the brace, 4.0 kN horizontally at 45°. Includes a safety factor of 1.5.
The operating instructions recommend attaching at 3/4 of the wall height or higher.
Always use at least two braces per element.
Choose Support 23 SThis is only a recommendation. Always check with your engineer before choosing a brace, and follow the permitted loads in the operating instructions.
| Model | Material | Length | Weight | Price | Best for |
|---|---|---|---|---|---|
| Support 23 S | Steel | 1.77–3.10 m | 7.2 kg | £ 169.00 | Walls up to 3 m, lower wind loads |
| Support 23 | Steel | 1.95–3.38 m | 13.2 kg | Ask for a price | Higher wind loads, sheeted walls |
| Support 35 | Steel | 2.85–4.97 m | 18 kg | Ask for a price | Taller walls, bracket far from the wall |
| ALU-Support 47 | Aluminium | 3.92–6.97 m | 33 kg | Ask for a price | Walls over 5 m |
Volume pricing for projects and fleets. Reply within 1 business day.
1.77–3.1 m · 7.2 kg 5.8–10.2 ft · 15.9 lbs
1.95–3.38 m · 13.2 kg 6.4–11.1 ft · 29.1 lbs
2.85–4.97 m · 18 kg 9.4–16.3 ft · 39.7 lbs
3.92–6.97 m · 33 kg 12.9–22.9 ft · 72.8 lbs
0.98–6.97 m · 31 kg 3.2–22.9 ft · 68.3 lbs
Add your first brace
Tap + Add to quote on a brace on the left, or drag a card into this box.
Tap + Add on a brace below.
Would you like a quote on our beam pullers as well? Set a quantity for any you are interested in — or just send your request.
Reply with pricing within 1 business day.
We will get back to you within 1 business day.
Used on jobsites in 25+ countries, across Europe, North America and beyond. Tag @stedox_official and your site might end up here.
100% money-back guarantee.
Saul
E-com manager
Steel structures. Use it to hold and align steel columns, beams and frames plumb before you weld them.
No. Switch the magnets on with the lever, adjust the brace to plumb, weld the structure, then switch the magnets off and lift the brace away. No turnbuckle to tack weld, cut off or grind clean.
It covers lengths from 3’3″ to 22’10”.
The load data for Support MAG is not online yet. Email Saul at saul@stedox.com and he will send you the operating instructions and load figures.
We ship internationally. If you can’t order directly from our site, email Saul at saul@stedox.com and he will help you out. Shipping is calculated at checkout; for a project or fleet order, ask us for a delivered price.
Yes. Message us on WhatsApp with your project and quantities and we will send a project price.
Visa, Mastercard, Maestro, American Express, Diners Club, PayPal, Apple Pay and Google Pay.








