Skip to content
Stedox® Wall Brace | Support 12

Support 12

  • 20,000+ sold
  • 4.8 on Google
  • 100% money back
Request a quote

How it works

How to use it

Four steps, one person. Read the full operating instructions before first use.

Extend to length

Pull the telescopic tube out to roughly the length you need. It adjusts in 3.94″ steps.

Lock it with the pin

Put the locking pin through the tube. Never load the brace without it.

Attach to wall and floor

Fasten both end brackets securely, at an angle of 30°–60° and above the centre of gravity of the wall.

Fine-adjust to plumb

Rotate the brace by the handle until the wall is plumb. The built-in stop keeps the threads from unscrewing.

Used on jobsites in 25+ countries

In the rental fleets of Ramirent and Brand. Chosen by Skanska USA.

World map with dots marking countries where Stedox tools are used
Ramirent

Ramirent FI 🇫🇮

Rents out Stedox wall braces.

Skanska USA

Skanska USA US 🇺🇸

Chose Stedox wall braces.

Brand Access Solutions

Brand Access Solutions UK

Rents out Stedox wall braces.

20,000+

braces out on jobsites

4.8/5

on Google, 35 reviews

3 fleets

of the big rental companies rent them out

2 min

to set up a brace, by yourself

100%

money-back guarantee

Jimmy, Saul and Dennis Sundström with Stedox braces

A family business that stands behind its products

We built these braces after years on site, and we answer for them ourselves. If something is not right, you talk to us directly.

20,000+

wall braces sold
Every one shaped by feedback from rental companies, installers and carpenters.

Just as easy as I imagined.

Jonny

We couldn’t be happier with the quality of Stedox tools. The boys at Wallstreet Carpentry are hard on our tools and rely on them to last.

Devin D., Wallstreet Carpentry

11 details that make the difference

Every benefit at a glance. Pick one to see the Stedox way next to the alternative.

Tap the right side for the next one, the left side to go back.

Stedox wall braces 1 / 11

Built-in stop

Don’t guess when you run out of thread

All our braces are manufactured with a built-in stop function for safety and reliability reasons.

With built-in stop
With built-in stop

The Stedox® way:

  • Built-in stop, no guesswork
  • Prevents accidental unscrewing
  • Trusted on real job sites
Without stop function
Without stop function

The alternative way:

  • Threads can run out without warning
  • Risk of sudden failure under load
  • You’re left guessing

Stop mark

See the limit before you reach it

A decal on the tube shows the moment the brace is at its maximum length.

With stop decal
With stop decal

The Stedox® way:

  • Clear max-length marking
  • No accidental over-extension
  • Readable at a glance
Without a decal
Without a decal

The alternative way:

  • Nothing marks the limit
  • Over-extended by mistake
  • Damage you find too late

High-visibility yellow

High-vis color for safety reasons

The yellow powder coat makes every brace easy to see on a busy site.

Bright yellow
Bright yellow powder coat

The Stedox® way:

  • Bright yellow powder coat
  • Easy to spot from across the site
  • Fewer trips and head strikes
Plain galvanized
Plain electro-galvanized finish

The alternative way:

  • Grey galvanized finish
  • Blends into the job site
  • Found with your shin

Double rust protection

Built for longevity with double rust protection

Every tube is hot-dip galvanized and then powder coated.

Hot-dip + powder coat
Hot-dip + powder coat

The Stedox® way:

  • Zinc covers 100% of the tube, inside and out
  • Powder coat on top
  • Made for wet and cold sites
Electro-galvanized only
Electro-galvanized tube left bare and rusting inside

The alternative way:

  • Zinc only reaches near the tube ends
  • Bare steel inside the tube
  • Rust starts where you can’t see it

High clearance

High clearance means a more versatile product

Even lying flat, the brace hovers above the ground on its end brackets.

High clearance
High clearance

The Stedox® way:

  • Tube hovers above the ground
  • Thick end brackets take the knocks
  • Rotates freely
Low clearance
Low clearance

The alternative way:

  • Tube rests on the floor
  • Thin tube walls dent on debris
  • Hard to rotate

Forged threaded rod

One forged piece where the load goes

The threaded rod and its ball head are forged as one part.

Forged, one piece
Stedox 2.0 adjuster with hot-forged grade 8.8 threaded rod

The Stedox® way:

  • Forged rod, grade 8.8 steel
  • Integrated ball head
  • No weld in the load path

Extra sturdy handle

A handle you can grip with gloves on

A CNC-machined aluminium handle on a U-bracket welded at two points.

Two-point weld
Aluminium handle with diamond pattern knurling

The Stedox® way:

  • Diamond-pattern knurling for grip
  • Comfortable, no sharp edges
  • Two-point weld to the tube

Quick rough adjustment

Wear out a pin, not the whole tube

Rough length is set in 3.94″ steps with a quick locking pin.

Locking pins
Stedox 2.0 locking pins

The Stedox® way:

  • Pins pass through both tube walls
  • No threads worn by the rough length
  • A worn pin is swapped in seconds
Welded nut
Welded nut on a galvanized tube, not replaceable

The alternative way:

  • Rough adjustment by thread
  • Threads wear out over time
  • The whole outer tube gets replaced

Easy fastening

More holes, more ways to hit something solid

A bigger end bracket with more holes and more hole types.

More holes, more sizes
More holes, more sizes

The Stedox® way:

  • More holes than a standard end bracket
  • Several hole sizes for different fasteners
  • Fastens to timber, concrete and steel
8 holes, 2 sizes
8 holes, 2 sizes

The alternative way:

  • Only 8 holes
  • Two hole sizes
  • Fewer places to fasten

Wider working angle

Reaches angles a flat prop can’t

High clearance gives the brace room to work at steeper angles.

Up to about 97°
Stedox wall brace at about 95 degrees

The Stedox® way:

  • Works up to about 97°
  • Room to place it where it suits
  • No fighting the bracket
About 76°
Other wall brace at about 75 degrees

The alternative way:

  • A low-clearance prop we measured stopped at about 76°
  • Fewer possible positions
  • You work around the prop

Many ways to attach

Fastens where the job needs it

The end brackets attach to floors, walls, edges and beams.

Flexible brackets
Stedox end brackets fastened to floors, walls, edges and beams

The Stedox® way:

  • Several attachment options
  • Adapts to the structure
  • No improvising on site

Which brace for which wall?

2,7 m
1,0 m 12,0 m
Where on the wall do you attach the brace? 1,8 m
1,8 m
Close, 1,0 m (60°) Far, 3,1 m (30°)
45°
30° min 45° is standard 60° max
What are you bracing?
How exposed is the site to wind?
Are the walls sheeted when they go up?
Your setup
2,6 m 45° 1,8 m 2,7 m attach at 1,8 m

We recommend

Support 23 S

1,8–3,1 m · 7,2 kg

Low wind loads and a floor bracket close to the wall: the light steel brace does the job.

Brace length needed: about 2,6 m

Permissible load at this length: about 5,7 kN along the brace, 4,0 kN horizontally at 45°. Includes a safety factor of 1.5.

The operating instructions recommend attaching at 3/4 of the wall height or higher.

Always use at least two braces per element.

Choose Support 23 S

This is only a recommendation. Always check with your engineer before choosing a brace, and follow the permitted loads in the operating instructions.

All wall braces
Model Material Length Weight Price Best for
Support 23 Steel 1,95–3,38 m 13,2 kg Ask for a price Higher wind loads, sheeted walls
Support 35 Steel 2,85–4,97 m 18 kg Ask for a price Taller walls, bracket far from the wall
ALU-Support 47 Aluminium 3,92–6,97 m 33 kg Ask for a price Walls over 5 m

Request a quote

Volume pricing for projects and fleets. Reply within 1 business day.

  1. Add braces
  2. Set quantity
  3. Send

Steel wall braces

  • Stedox® Wall Brace | Support 12

    Support 12

    0,98–1,8 m · 7 kg 3,2–5,9 ft · 15,4 lbs

  • Stedox® Wall Brace | Support 23 S

    Support 23 S

    1,77–3,1 m · 7,2 kg 5,8–10,2 ft · 15,9 lbs

  • Stedox® Wall Brace | Support 23

    Support 23

    1,95–3,38 m · 13,2 kg 6,4–11,1 ft · 29,1 lbs

  • Stedox® Wall Brace | Support 35

    Support 35

    2,85–4,97 m · 18 kg 9,4–16,3 ft · 39,7 lbs

Aluminium wall braces

  • Stedox® Wall Brace | ALU-Support 47

    ALU-Support 47

    3,92–6,97 m · 33 kg 12,9–22,9 ft · 72,8 lbs

Magnetic braces

  • Stedox® Magnetic Brace | Support MAG

    Support MAG

    0,98–6,97 m · 31 kg 3,2–22,9 ft · 68,3 lbs

Your quote

0 braces

Add your first brace

Tap + Add to quote on a brace on the left, or drag a card into this box.

Tap + Add on a brace below.

    Your details

    Building type · pick one or more

    Rent them instead?

    Braces to rent, where you build.

    Tell us the country, the braces and the dates. We check availability and put you in touch with the rental partner.

    Direct from the jobsite

    Used on jobsites in 25+ countries, across Europe, North America and beyond. Tag @stedox_official and your site might end up here.

    Stedox braces on jobsites around the world

    What crews say about the braces

    Messages, comments and reviews from crews who use the braces on their own jobs.

    Use them on a job. Send them back if they don’t earn their place.

    100% money-back guarantee.

    • Direct from the manufacturer in Finland
    • Project and fleet prices on request
    Saul, e-com manager at Stedox

    Saul
    E-com manager

    Reach out to Saul if you have any questions before you buy.

    Free field guide

    6 efficient ways to attach a wall brace to the floor

    Where the bottom bracket goes decides how fast you brace. Six fastening methods crews use on the ground or floor.

    • Methods for concrete slabs and bare ground
    • The pros and cons of each method
    • Our rating of each, out of 5

    One email with the PDF. No spam, unsubscribe anytime.

    Cover of the Stedox field guide on attaching wall braces to the floor or the ground

    Questions crews ask before buying

    Which brace do I need for my wall height?

    It depends on the wall height and the wind loads. Use “Which brace for which wall?” on this page, or send us your wall heights and we will tell you.

    How many braces do I need per wall?

    Always at least two wall braces per element. How many more depends on the loads, which a qualified engineer must calculate for your project.

    What load can the brace take?

    The allowable axial loads by length, including a safety factor of 1.5, are in the load table on this page. The full load tables are in the operating instructions.

    Do you ship to my country?

    We ship internationally. If you can’t order directly from our site, email Saul at saul@stedox.com and he will help you out. Shipping is calculated at checkout; for a project or fleet order, ask us for a delivered price.

    Can I get a volume price for a project or rental fleet?

    Yes. Message us on WhatsApp with your wall heights and quantities and we will send a project price.

    What payment methods do you accept?

    Visa, Mastercard, Maestro, American Express, Diners Club, PayPal, Apple Pay and Google Pay.

    Safety, efficiency and precision with Stedox wall braces.

    In stock, ships same or next day