Brace finder
Find the right wall brace for your wall.
Set the wall height, where the brace attaches and how exposed the site is. We pick the brace and show what it holds at that length.
Which brace for which wall?
1.0 m
12.0 m
Where on the wall do you attach the brace?
Close, 1.0 m (60°)
Far, 3.1 m (30°)
30° min
45° is standard
60° max
What are you bracing?
How exposed is the site to wind?
Are the walls sheeted when they go up?
We recommend · Aluminium
Support 23 S
1.8–3.1 m · 7.2 kg
Low wind loads and a floor bracket close to the wall: the light steel brace does the job.
Bracing against steel?
We also make braces with magnetic clamps that hold straight onto steel, with no drilling. They are sold as separate products.
See the magnetic-clamp braces
Brace length needed: about 2.6 m
Permissible load at this length: about 5.7 kN along the brace, 4.0 kN horizontally at 45°. Includes a safety factor of 1.5.
The operating instructions recommend attaching at 3/4 of the wall height or higher.
Always use at least two braces per element.
Check out Support 23 SThis is only a recommendation. Always check with your engineer before choosing a brace, and follow the permitted loads in the operating instructions.
| Model | Material | Length | Weight | Price | Best for |
|---|---|---|---|---|---|
| Support 23 S | Steel | 1.77–3.10 m | 7.2 kg | Ask for a price | Walls up to 3 m, lower wind loads |
| Support 23 | Steel | 1.95–3.38 m | 13.2 kg | Ask for a price | Higher wind loads, sheeted walls |
| Support 35 | Steel | 2.85–4.97 m | 18 kg | Ask for a price | Taller walls, bracket far from the wall |
| ALU-Support 47 | Aluminium | 3.92–6.97 m | 33 kg | Ask for a price | Walls over 5 m |
Saul
E-com manager
