I recommend these products to all who work not only with wood but concrete and even steel as well.
Trusted by




1,800+ builders trust Stedox
Stedox® Wall Brace | Support 23 S
Support 23 S
Lightweight, fast, and incredibly easy to use. Only 16 lbs, perfect for walls up to 10 ft and projects with lower wind loads. A robust installation support built to withstand tough use – made for tradespeople who want long service life and zero hassle.
Not sure which brace?
Answer 3 questions and we pick the model for your wall.
How tall is the wall?
What are you bracing?
What bracing angle do you want?
A starting point, not a structural calculation. Check the load table, and have the bracing verified by the responsible engineer.
Model
Why crews love it:
- Plumb the wall by turning the brace
- Extends in 3.94″ steps, locks with a pin
- Reused job after job
🚚
20,000+ braces sold
On site in 25+ countries and in rental fleets.
🛡️
100% money-back guarantee
Use them on a job. If they are not right, send them back.
A day and a half of work, done in one day
On a real job with 3 guys and a large crane, the walls went up 50% faster than with 2×4s.
4 h
saved for 3 guys and a crane. That is about $1,320 on one job.
Why: a 2×4 is cut, nailed and re-nailed, with no fine adjustment. A brace is turned until the wall is plumb. Counted at $60 per hour per person and $150 per hour for the crane.
Details
What makes it great:
What’s included
With every wall brace ordered, you receive:
- 🧰 1× Stedox wall brace, ready to use
- 📄 Operating instructions and load table
- 💬 WhatsApp support from Saul
Product information
Description
Stedox® Support 23 S is a wall brace used to erect and install prefabricated elements, panels and columns. It was developed from the ground up to be safe, durable and easy to handle.
Extend it in 3.94″ steps, lock it with the locking pin, attach it to the wall and floor, then rotate the brace to fine-adjust it to plumb. Rust protection: Strip galvanized tubes, powder coated, for a long life in wet and harsh conditions.
Technical details
Length: 5.8–10.2 ft
Rough adjustment: 3.94″
Weight: 15.9 lbs
Locking pins: 1
Bracing angle: 30°–60°
Made in: Finland
End bracket · can be tailor-made

- Up to 18 holes per end bracket
- Fits floors, walls, edges and beams
- Dimensions and hole patterns in the drawing
- Need another hole pattern or branding? We tailor the end bracket to your project.
Allowable load
Stedox® Support 23 S · 5.8–10.2 ft · 15.9 lbs
| Length [ft] | 5.6 | 6.6 | 8.2 | 9.8 |
|---|---|---|---|---|
| Permissible load [lbf] | 1,420 | 1,420 | 1,350 | 720 |
Allowable loads include a safety factor of 1.5. Values are based on Eurocode 3 calculations and laboratory tests. All loads must be calculated by a qualified engineer; the brace angle must be between 30° and 60°.
How it works
How to use it
Four steps, one person. Read the full operating instructions before first use.

Extend to length
Pull the telescopic tube out to roughly the length you need. It adjusts in 3.94″ steps.

Lock it with the pin
Put the locking pin through the tube. Never load the brace without it.

Attach to wall and floor
Fasten both end brackets securely, at an angle of 30°–60° and above the centre of gravity of the wall.

Fine-adjust to plumb
Rotate the brace by the handle until the wall is plumb. The built-in stop keeps the threads from unscrewing.
Used on jobsites in 25+ countries
In the rental fleets of Ramirent and Brand. Chosen by Skanska USA.

Ramirent FI 🇫🇮
Rents out Stedox wall braces.

Skanska USA US 🇺🇸
Chose Stedox wall braces.

Brand Access Solutions UK
Rents out Stedox wall braces.
20,000+
braces out on jobsites
/5
on Google, 35 reviews
3 fleets
of the big rental companies rent them out
2 min
to set up a brace, by yourself
100%
money-back guarantee

A family business that stands behind its products
We built these braces after years on site, and we answer for them ourselves. If something is not right, you talk to us directly.
20,000+
wall braces sold
Every one shaped by feedback from rental companies, installers and carpenters.
Just as easy as I imagined.
Jonny
We couldn’t be happier with the quality of Stedox tools. The boys at Wallstreet Carpentry are hard on our tools and rely on them to last.
Devin D., Wallstreet Carpentry
11 details that make the difference
Every benefit at a glance. Pick one to see the Stedox way next to the alternative.
Tap the right side for the next one, the left side to go back.
Stedox wall braces 1 / 11
Built-in stop
Don’t guess when you run out of thread
All our braces are manufactured with a built-in stop function for safety and reliability reasons.
The Stedox® way:
- Built-in stop, no guesswork
- Prevents accidental unscrewing
- Trusted on real job sites
The alternative way:
- Threads can run out without warning
- Risk of sudden failure under load
- You’re left guessing
Stop mark
See the limit before you reach it
A decal on the tube shows the moment the brace is at its maximum length.
The Stedox® way:
- Clear max-length marking
- No accidental over-extension
- Readable at a glance
The alternative way:
- Nothing marks the limit
- Over-extended by mistake
- Damage you find too late
High-visibility yellow
High-vis color for safety reasons
The yellow powder coat makes every brace easy to see on a busy site.
The Stedox® way:
- Bright yellow powder coat
- Easy to spot from across the site
- Fewer trips and head strikes
The alternative way:
- Grey galvanized finish
- Blends into the job site
- Found with your shin
Double rust protection
Built for longevity with double rust protection
Every tube is hot-dip galvanized and then powder coated.
The Stedox® way:
- Zinc covers 100% of the tube, inside and out
- Powder coat on top
- Made for wet and cold sites
The alternative way:
- Zinc only reaches near the tube ends
- Bare steel inside the tube
- Rust starts where you can’t see it
High clearance
High clearance means a more versatile product
Even lying flat, the brace hovers above the ground on its end brackets.
The Stedox® way:
- Tube hovers above the ground
- Thick end brackets take the knocks
- Rotates freely
The alternative way:
- Tube rests on the floor
- Thin tube walls dent on debris
- Hard to rotate
Forged threaded rod
One forged piece where the load goes
The threaded rod and its ball head are forged as one part.
The Stedox® way:
- Forged rod, grade 8.8 steel
- Integrated ball head
- No weld in the load path
Extra sturdy handle
A handle you can grip with gloves on
A CNC-machined aluminium handle on a U-bracket welded at two points.
The Stedox® way:
- Diamond-pattern knurling for grip
- Comfortable, no sharp edges
- Two-point weld to the tube
Quick rough adjustment
Wear out a pin, not the whole tube
Rough length is set in 3.94″ steps with a quick locking pin.
The Stedox® way:
- Pins pass through both tube walls
- No threads worn by the rough length
- A worn pin is swapped in seconds
The alternative way:
- Rough adjustment by thread
- Threads wear out over time
- The whole outer tube gets replaced
Easy fastening
More holes, more ways to hit something solid
A bigger end bracket with more holes and more hole types.
The Stedox® way:
- More holes than a standard end bracket
- Several hole sizes for different fasteners
- Fastens to timber, concrete and steel
The alternative way:
- Only 8 holes
- Two hole sizes
- Fewer places to fasten
Wider working angle
Reaches angles a flat prop can’t
High clearance gives the brace room to work at steeper angles.
The Stedox® way:
- Works up to about 97°
- Room to place it where it suits
- No fighting the bracket
The alternative way:
- A low-clearance prop we measured stopped at about 76°
- Fewer possible positions
- You work around the prop
Many ways to attach
Fastens where the job needs it
The end brackets attach to floors, walls, edges and beams.
The Stedox® way:
- Several attachment options
- Adapts to the structure
- No improvising on site
Which brace for which wall?
We recommend · Aluminium
Support 23 S
5.8–10.2 ft · 15.9 lbs
Low wind loads and a floor bracket close to the wall: the light steel brace does the job.
Brace length needed: about 8.4 ft
Permissible load at this length: about 1280 lbf along the brace, 900 lbf horizontally at 45°. Includes a safety factor of 1.5.
The operating instructions recommend attaching at 3/4 of the wall height or higher.
Always use at least two braces per element.
Check out Support 23 SThis is only a recommendation. Always check with your engineer before choosing a brace, and follow the permitted loads in the operating instructions.
| Model | Material | Length | Weight | Price | Best for |
|---|---|---|---|---|---|
| Support 23 S | Steel | 5.8–10.2 ft | 15.9 lbs | Ask for a price | Walls up to 10 ft, lower wind loads |
| Support 23 | Steel | 6.4–11.1 ft | 29.1 lbs | Ask for a price | Higher wind loads, sheeted walls |
| Support 35 | Steel | 9.4–16.3 ft | 39.7 lbs | Ask for a price | Taller walls, bracket far from the wall |
| ALU-Support 47 | Aluminium | 12.9–22.9 ft | 72.8 lbs | Ask for a price | Walls over 16 ft |
Rent them instead?
Braces to rent, where you build.
Tell us the country, the braces and the dates. We check availability and put you in touch with the rental partner.
Direct from the jobsite
Used on jobsites in 25+ countries, across Europe, North America and beyond. Tag @stedox_official and your site might end up here.

What crews say about the braces
Messages, comments and reviews from crews who use the braces on their own jobs.

Use them on a job. Send them back if they don’t earn their place.
100% money-back guarantee.
- Direct from the manufacturer in Finland
- Project and fleet prices on request

Saul
E-com manager
Reach out to Saul if you have any questions before you buy.
Free field guide
6 efficient ways to attach a wall brace to the floor
Where the bottom bracket goes decides how fast you brace. Six fastening methods crews use on the ground or floor.
- Methods for concrete slabs and bare ground
- The pros and cons of each method
- Our rating of each, out of 5
One email with the PDF. No spam, unsubscribe anytime.

Questions crews ask before buying
It depends on the wall height and the wind loads. Use “Which brace for which wall?” on this page, or send us your wall heights and we will tell you.
Always at least two wall braces per element. How many more depends on the loads, which a qualified engineer must calculate for your project.
The allowable axial loads by length, including a safety factor of 1.5, are in the load table on this page. The full load tables are in the operating instructions.
We ship internationally. If you can’t order directly from our site, email Saul at saul@stedox.com and he will help you out. Shipping is calculated at checkout; for a project or fleet order, ask us for a delivered price.
Yes. Message us on WhatsApp with your wall heights and quantities and we will send a project price.
Visa, Mastercard, Maestro, American Express, Diners Club, PayPal, Apple Pay and Google Pay.
Safety, efficiency and precision with Stedox wall braces.
In stock, ships same or next day




